Technical Specs |
DOWNLOAD GRADE CHART pdf formatGrade |
Wc% |
Ta% |
Co% |
Ra |
Density g/cc |
TRS KSI |
TRS N/mm2 |
Average Grain Sz |
Usage |
| LC403 | 96 | 1 | 3 | 93.3 | 15.12 | 358 | 2470 | 1.1 | Highest wear, light turning, wear resistant |
| LC410 | 89 | 5 | 6 | 92.9 | 14.44 | 316 | 2180 | 1.1 | Work rest tools, turning inserts |
| LC106 | 94 | 0 | 6 | 92.7 | 14.94 | 483 | 3330 | .8 | Cutters. inserts,wear parts |
| LC206 | 94 | 0 | 6 | 91.1 | 14.95 | 409 | 2820 | 2.5 | Brazed cutter heads, brazed work rest blades |
| LC109 | 91 | 0 | 9 | 91.7 | 14.69 | 497 | 3430 | 1.1 | Cutters, inserts |
| LC110 | 90 | 0 | 10 | 91.6 | 14.55 | 446 | 3075 | 1.1 | Work rest blades |
| LC112 | 88 | 0 | 12 | 91.0 | 14.37 | 488 | 3365 | 1.1 | Dies, Punches |
| LC115 | 85 | 0 | 15 | 89.7 | 14.17 | 516 | 3560 | .8 | Dies, Punches |
| LC215 | 85 | 0 | 15 | 88.5 | 14.17 | 489 | 3370 | 2.5 | Dies, Punches, most shock resistant |
| LC515 | 85 | 0 | 15 | 92.5 | 14.17 | 441 | 3041 | .5 | Dies, Punches |
| LC217 | 83 | 0 | 17 | 87.0 | 13.85 | 471 | 3250 | 2.5 | Lamination dies, heavy use |
| LC220 | 80 | 0 | 20 | 85.0 | 13.80 | 477 | 3290 | 3.0 | Draw dies, draw punches, shock resistant |
| LC225 | 75 | 0 | 25 | 83.5 | 13.05 | 466 | 3210 | 4.0 | Draw dies, header dies, highest shock resistant |
| LCAA | 89-90 | 0 | 10-11 | 89.5-91.0 | 14.17 | 490 | 3378 | .8-4.0 | Punches & Dies, Wear Tooling |
PO Box 539 1061 Lamont Drive Meadville, Pennsylvania 16335 USA
Phone: 814-724-5454 & 800-441-7385 Fax: 814-724-5493
EMAIL s
MADE IN THE USA